Quality Control Plan Template

Electrical Quality Control Plan Template 2026

Create comprehensive quality control plans for electrical work. Includes inspection test plans (ITPs), hold points, and QA/QC checklists.

Generate with AI Learn More

Fast Generation

AI creates your complete electrical QCP with ITPs in minutes.

ISO 9001 Aligned

Quality management system principles built in.

Hold Points Defined

Critical inspection points for your specific work scope.

Electrical Quality Checkpoints

ITP Inspection Points

Pre-installation cable inspection
Conduit and trunking alignment
Connection torque verification
Labeling and identification
Final testing and certification

Quality Control Measures

Cable sizing verification
Insulation resistance testing
Earth continuity testing
Polarity checks
RCD functionality testing
Load testing
Certificate of Compliance (CoC) issuance

What's Included in Your Electrical QCP

Quality Control Plan

Project quality objectives
Roles and responsibilities
Document control procedures
Non-conformance management
Corrective action procedures

Inspection Test Plan (ITP)

Activity-specific inspections
Hold, witness & review points
Acceptance criteria
Reference standards
Required documentation

Applicable Standards

SANS 10142-1 (Wiring of premises)

OHSA Construction Regulations 2014

Electrical Installation Regulations

SANS 10142-2 (Low voltage installations)

ISO 9001 Quality Management

CIDB Requirements (EP, EB)

Electrical Activities Covered

Cable installation and termination

Distribution board installation

Lighting installation

Power socket installation

Earthing and bonding

Testing and commissioning

Fault finding and repairs

Generator installation

Electrical Quality Control in South Africa

Electrical work on South African construction sites is governed by the Electrical Installation Regulations (EIR) under the OHSA and SANS 10142 series. Every installation must be signed off by a registered electrician and accompanied by a Certificate of Compliance (CoC). Contractors bidding on government tenders must demonstrate competence in isolation procedures, live-work protocols, and arc flash protection. CIDB classes EP and EB cover electrical engineering works, and grading determines the maximum contract value your firm can take on. Common tender requirements include a detailed method statement, a hazard identification and risk assessment (HIRA) specific to electrical work, and proof that all personnel hold valid wireman's licences.

QCP Critical Points for Electrical

✓Insulation resistance must exceed 1MΩ per SANS 10142-1 clause 8.5 — record actual readings

✓Earth loop impedance must ensure disconnection within 0.4s for socket circuits and 5s for fixed equipment

✓Verify every RCD trips within 300ms at rated current and within 40ms at 5× rated current

✓Check all cable colour coding complies with SANS 10142-1:2017 amendment (brown/blue/green-yellow)

✓Thermal imaging scan of all distribution boards under load before handover

Common Electrical QCP Mistakes to Avoid

✗Submitting a generic method statement that doesn't mention SANS 10142 or EIR — immediate red flag for assessors

✗Failing to include wireman's licence numbers for each electrician listed on the project

✗Not specifying arc flash PPE category per panel — required for HIRA compliance

✗Using old colour codes (red/black) in documentation when SANS 10142-1:2017 requires brown/blue

✗Omitting the CoC process — without this, the installation cannot be legally energised

Key Legislation for Electrical Quality Control

Legislation / Standard	QCP Requirement
SANS 10142-1:2017	Wiring of premises — sets rules for conductor sizing, protection, earthing, testing, and CoC requirements. Updated 2017 to align with IEC colour codes.
Electrical Installation Regulations (EIR)	Under OHSA — requires all installations to be done by registered persons, inspected, and certified with a CoC before energisation.
OHSA Construction Regulations 2014, Reg 24	Electrical installations on construction sites must be inspected weekly by a competent person. Temporary supplies need earth leakage protection.
SANS 10142-2	Low-voltage installations exceeding 100A — additional requirements for industrial and commercial installations common in government tenders.

Electrical Quality Control Plan FAQ

Do I need a CoC for construction-phase temporary electrical installations?

Yes. The Electrical Installation Regulations require a CoC for any fixed installation, including temporary site power. A registered electrician must sign off before the supply is energised.

What CIDB grading do I need for electrical tender work?

Electrical works fall under CIDB classes EP (Electrical Engineering: Infrastructure) and EB (Electrical Engineering: Building). Your grading level (1-9) determines the maximum single contract value you can tender for.

Is arc flash PPE mandatory for all electrical work?

You must do an arc flash risk assessment per SANS 724. PPE category depends on calculated incident energy. For most distribution board work, Category 2 (8 cal/cm²) arc-rated clothing is the minimum.

How long is a wireman's licence valid?

Wireman's licences issued by the Department of Employment and Labour do not expire but must be carried on site at all times. The employing contractor must verify licences before assigning work.

Generate Your Electrical Quality Control Plan Now

Complete QCP with ITPs, inspection checklists, and hold point definitions. Ready for tender submission.

Start Free - No Card Required

Related Resources

Electrical Method Statement →Electrical HIRA Template →Electrical Tenders →